aboni HydroTracer HT3 - User Manual

aboni
HydroTracer HT3
Operation Manual
Version HT3 STD
12/11/2019
aboni GmbH für Mess- und Automatisierungstechnik
Friedrich-Ebert-Str. 27
D-14548 Schwielowsee- Caputh
Tel.: +49 700 22664 366
Fax: +49 700 22664 329
E-Mail: info@aboni.de
Web: www.aboni.de
www.hydrotracer.com

aboni HydroTracer HT3 Specifications

General

Resolution	0.1% RH
Accuracy	±0.5%
Operating Temperature	-10°C to +60°C
Measuring Range	0 to 100%
Measurement Range	0 to 100% RH

Summary

Initial Operation

Installation of the Control Software HT3 STD

Describes installing the HydroTracer control software and its driver on a PC.

Connecting the HydroTracer

Details how to connect the HydroTracer device to the PC using a USB cable.

Measuring Principle

The Reagent

Performing a Test

The procedure step by step

Guides users through the entire process of performing a test with the HydroTracer.

Selection of Sample Weight

Explains how to determine the correct sample weight based on expected moisture content for accurate results.

Operation menu with manual input: Loading the HydroTracer

Describes the manual sequence of operations for preparing and loading the device.

Operation menu with automatic weight input: Loading the HydroTracer

End of the test

Output of the results and storage

HTML-Report

PDF-Report

Errors

Remarks concerning calcium hydride