21
3.3 Reset to Factory Default Settings
Read the section "Open & close the dome housing" before.
1. First remove the power from the camera.
2. Press and hold the "Reset" button inside
the camera..
3. Now connect the power supply to the
camera (via 2-pin power supply or Power-
over-Ethernet) and keep the "Reset" button
pressed for another 30 seconds.
3.4 MicroSD Card Slot
Read the section "Open & close the dome housing" before.
The micro-SD card slot is located in the interior
next to the reset button. The locking of the
microSD card holder can be opened by moving
it.
"Open" -> Open
"Close" -> Lock
Carefully insert the microSD card according to
the slots in the holder. Then lock the bracket.
Max. SD card size: 256 GB
After installing the Micro-SD card, the card must be formatted before it can be used.
Reset
microSD
To Next Page
Loading...
Need help?
General
