Abus TVAC15000 - Installing the monitor

31
English
Then screw the camera onto the mount and the power supply unit with the camera.
5.3 Installing the monitor
The installed battery gives you the option of using the TFT monitor flexibly.
When the battery LED lights up red, the battery needs charging Make sure that the battery is always
sufficiently charged in order to guarantee no loss of recording.
To do this, unfold the stand and position the monitor on the desired location.
Warning:
Only use the antenna provided for the installation.
Warning:
Note that the monitor has to
be charged for at least 8 hours before it is used without an
external power supply for the first time.
The battery life is about 3.5 hours.