12.3.6.4. Other Alarm
PIR Alarm
Enable PIR Alarm
You can enable the PIR alarm in order to configure an event-triggered action.
Alarm Name
You can specify a name for the alarm input here. Please do not use the alarm input no. or any special
characters.
Linkage Method
Here you can set the action to be performed in case of an alarm.
Linkage Method
Acoustic signal: An alarm is output at the camera.
Notify Surveillance Center: Notify Surveillance Center
Send email: You receive an email as notification; check the checkbox to activate
this.
Enable recording: Enables recording to the internal microSD card.
128
To Next Page
Loading...
