20
AIRTAP FAQ
Q: Will I be able to mount this fan on my ceiling?
A: For safety reasons, we do not recommend mounting the AIRTAP on your ceiling.
Q: Will I be able to mount this fan on a baseboard style register?
A: No. Because of the tilted design, the AIRTAP will not have the clearance to be properly mounted.
Q: My register is bigger than my fan's rear insert. How can I fit this fan onto my register?
A: We can only recommend using the appropriately sized AIRTAP fan for your register. Contact
customer service for fitment issues.
Q: Does this register booster fan have fittings to use a filter with?
A: This product is not specifically designed to be used with filters.
Q: Can I reverse this fan's airflow?
A: The AIRTAP's boosted airflow cannot be reversed, nor can the fans be flipped.
Q: What temperature is the register booster fan detecting?
A: The AIRTAP's backside probe reads the airflow temperature of your register vent. Please note
this temperature may vary from your home thermostat's reading.
Q: My register booster fan is too loud. How do I decrease the fan noise?
A: To minimize the noise coming from the AIRTAP, decrease the maximum fan speed. Refer to
page 19.
Q: My fan is constantly running when I don't need it to. How do I turn it off?
A: The heating and cooling triggers may be active at the same time. Disable the trigger you are not
using by holding the mode button until the screen displays OF.
To Next Page
Loading...
