16
Power from all sources involved in this step must be completely shut before proceeding.
If you are unfamiliar or have doubts about performing this step, seek the services of a qualified,
trained, and licensed professional. See page 6 for additional product warnings and safety guidelines.
INSTALLATION
HARDWIRING
STEP 1
If your fan is plugged in, make sure to unplug it
from its power socket.
Locate your home's main electrical panel and
flip the your room's circuit breaker to OFF.
STEP 2
Use a non-contact voltage tester (not included)
to confirm that electricity is fully depleted from
your wires.
Proceed only if the tester shows no current.
OFF
To Next Page
Loading...
