AC S.A. all rights reserved. Under penalty of law and/or liability claims it is forbidden to copy, publish, distribute, make available and/or use in any way all or any part of information contained
within this document, in particular photographs, drawings, illustrations, trademarks, etc
41
Fig. 33 Multiplier map. Suggested area of petrol map acquisition.
Fig. 34 Multiplier map. Suggested area of gas map acquisition.
2.9.1. Multiplier matching
When 2/3 of the suggested area on gas and petrol map is acquired, button for multiplier matching
function is activated. The operation modifies the multiplier based on a deviation between the recorded
maps for petrol and gas injection. If map differences are minor, the multiplier is not modified.
It is recommended to acquire injection time maps for the full suggested range of
engine operation. Multiplier matching is locked when autoadaptation is active
(ISA3 or OBD).
To Next Page
Loading...
Need help?
General
