Chapter 4: Configuration
Setup Mode
Steps to enter Setup Mode
1. Press and hold button while turning ON the scale. When the LED display shows
[ :ACAIA ]and then[ SEt ] , press and hold button for another 1 second without releasing
button. Release both and buttons when the display shows [ F.0000 ]. with the very
left 0 flashing.
2. Press and hold button for 1 second to move the flashing digit to the right. Repeat this step for
4 times to enter the first setting in Setup Mode: the LED display shows [ SLEEP ].
Key Operations in Setup Mode
1. Press button to toggle through setting menu or the options under each setting.
2. Press and hold button to enter each setting or to confirm the selected option.
3. Press button to return to setting menu without saving or to return to Weighing Mode from
setting menu.
To Next Page
Loading...
