Zero Range Settings [ 0.rAnGE ]
Zero Range setting determines the range for which button executes zero operation instead of
tare operation.
1. When Zero Range is set to 2, the range for zero-setting will be 2% of the capacity, i.e., +/- 40g
for acaia Coffee Scale. By pressing button, any weight within +/- 40g is zeroed out by zero
operation while any weight lays outside the range is tared out by tare operation.
2. If Zero Range is set to 100, the range for zero-setting will be 100% of the capacity, i.e., +/- 2kg
for acaia Coffee Scale. Therefore, instead of tare operation, zero operation would be executed in
this setting whenever button is pressed.
Notice: The difference between zero operation and tare operation is that zero operation would
simply ignore the weight and display as 0 while tare operation would deduct the weight from
weighing result. However, zero operation does not increase the scale capacity.
Weighing Filter Settings [ Filt. ]
1. The number shown on LCD display indicates the current filter parameter which determines the
speed for load receptor to response to weight and to determine the weighing value. The larger
the number, the more stable but slower the weighing result will be.
2. Press button to change the parameter.
3. Press and hold button for 1 second until the next setting, [ Unit ] is shown on the LED to
confirm the selected parameter.
Default Weighing Unit [ Unit ]
1. The Default Weighing Unit is set to be gram if [ 9 ] is selected and ounce if [ o2 ] is
selected.
2. Press button to switch the Default Weighing Unit between gram and ounce.
3. Press and hold button for 1 second until [ rESoL ] is shown on LED to confirm the selected
option.
To Next Page
Loading...
