Switch Jacks A and B
If you use a switch or switches for access to your device, plug them into these jacks. To use a
joystick, you will need a Y-adapter. If you have a joystick plugged in and it does not respond
normally, reverse the way it is plugged in (plug switch A into jack B, switch B into jack A).
Using the Touch Screen
Do not use sharp, pointed objects on the touch screen. The touch screen scratches easily and
can become permanently damaged. The touch screen is designed to be used with a finger or
stylus.
Using a Stylus or Headstick
If you use a stylus or headstick, it must be made specifically for a capacitive touch screen. Use
of any other object will harm the touch screen and may cause the device to stop working.
PRC offers a stylus bundle (6) in the PRC e-store at www.prentrom.com/store
Using the Virtual Keyboard
NuVoice provides the flexibility to hide or show the Windows Virtual Keyboard. To enable or
disable the keyboard:
1. Open the NuVoice Toolbox.
2. Select Access Method Menu.
3. Select Windows Access Settings.
4. Select Auto Hide Keyboard.
Cleaning the Touch Screen
If the touch screen gets wet from rain, saliva, condensation, etc., clean and wipe it dry
immediately. For information on cleaning the touch screen, see “Cleaning and Disinfecting” on
page 30.
The touch screen is a liquid crystal display (LCD). Should the display break (unlikely
except in extreme circumstances) and you come into contact with the liquid crystal, wash and
rinse your skin thoroughly. Be careful to avoid splintered glass. If you chip or crack the screen,
call the PRC Service Department at 800-262-1990 immediately for a replacement. A small chip
or crack can get worse over time and pose risk of injury to the user.
Accent 1000 Hardware Manual 10
To Next Page
Loading...
