Shutting Down the Accent using Windows
Selecting Shutdown from the Power Off menu in the Charms menu only puts the device into a
form of “sleep”. This takes about 30 seconds. The advantage is that the device wakes up
quickly. The disadvantage is it does not clean up the memory or provide a fresh start when the
device restarts. When the device is asleep, the blue indicator light turns off.
1. Bring up the Windows Start screen.
2. Pull out the Charms menu from the right side of the display.
3. Select Settings.
4. Select the Power icon and Shutdown.
Remember: This does not perform a full shutdown.
Waking Up the Accent
1. Lightly press the power button.
2. The device will wake up and return to the Windows Start screen.
3. If NuVoice does not open on its own, open NuVoice by selecting the NuVoice tile on the
Start screen. Or select the Accent screen and then select the NuVoice icon.
Performing a Full Shutdown
A full shutdown should be done at least once a week. Follow these steps to ensure a complete
shutdown of the device.
1. In NuVoice, select the Tools key to open the Tools menu.
2. Open the Toolbox.
3. Select Maintenance Menu.
4. Select Power Management.
5. Select Shutdown.
6. A yellow prompt box asks “Are you sure?” Select Yes.
When the device has shut down, it will automatically return to NuVoice when powered on
again.
Tip: You can set up a key in NuVoice to perform a complete shutdown by inserting the
Shutdown tool.
Accent 1000 Hardware Manual 26
To Next Page
Loading...
