8. Set Output Method to Bluetooth.
9. You will see a yellow box telling you to press the Pair button on the adapter. Press the white
circle label on the Bluetooth adapter.
10. The LED on the adapter will begin to blink. When you see a solid light, the adapter has
paired with your device and computer. This can take up to 20-30 seconds. In the status box
in the Output menu you will see “Paired, Connected”.
11. Exit the Output menu and go to your spelling keyboard.
12. Open a Word document or an application on your computer that you can type into.
13. Begin typing on your spelling keyboard. Your information should appear on your computer
screen.
Once the adapter is paired with your computer, it should always be paired. You can remove
it from your computer. The next time you plug it in, the LED should light and it should be ready
to go as long as the Output menu is set correctly.
The Bluetooth adapter has a wide range. Your communication device and the adapter do not
have to "see" each other to work.
The Paired Devices option in the Output menu allows you to see and re-connect to any
Bluetooth devices you have been paired with. Disconnect allows you to disconnect from your
current Bluetooth device.
Accent 1000 Hardware Manual 18
To Next Page
Loading...
