If you have access to a USB keyboard:
1. Plug the keyboard into a USB port on the Accent.
2. Press Ctrl-Alt-Del.
3. If a blue screen appears with Lock, Switch, Sign-out, etc. on it, use the Tab key until it
highlights the I/O option in the lower left corner.
4. Select Enter.
5. Select Restart.
As a Last Resort
Press and hold the device power button until the device shuts down (about 10 seconds). Press
the power button again to restart the device.
Important! This action may cause issues with the memory and performance of the device.
If the device is still not working correctly, proceed to the next section, “Restoring Windows”.
Accent 1000 Hardware Manual 34
To Next Page
Loading...
