When the Restore is Complete
1. Follow the Windows Setup and Customizing instructions that appear on the screen.
ļ Use accent 1000 for a username or account name.
2. From the Windows Start screen, select the Accent icon to go directly to NuVoice or select
the Accent tile to go to the Accent screen. Then select the NuVoice icon in the upper right
portion of the screen.
3. NuVoice will automatically install and generate the icon sets. This process will take several
minutes.
4. When NuVoice is set up, the system will restart and open NuVoice automatically.
5. Select I Agree on the Software License Agreement.
6. NuVoice will open the Exploration Wizard.
7. To exit the Exploration Wizard, select the vocabulary you want to use.
If the vocabulary you want is not shown on the Wizard, open the Toolbox, select User Area
Menu, select Replace User Area, and follow the directions on the display to select the
vocabulary you want to use.
Accent 1000 Hardware Manual 36
To Next Page
Loading...
