Accent 800 - Customization and Backup

Accent 800 User’s Guide: NuVoice 34
Accessing the Setup Key
1. Select the Tools key.
2. From the slide-out menu, select Setup Key.
3. Select the key you want to customize.
Customizing a Key
1. Be looking at the key you want to customize. Select the Tools key and then select Setup Key.
2. Select the key and select Change Icon. Do one of the following:
• Use an image available on the device: Select Spell Icon to Find, spell what you are looking for,
and select OK. Touch the icon you want or select an icon category and browse to the icon you
want.
• Take a picture: Select Take Picture. Frame the picture and then select Take Picture. Select Save
as Icon, Rename Icon, and OK. See also “Taking Your Own Photo to Use on a Key” below.
• Use your own photo: Plug a USB flash drive that has the photo you want into the device. Select
Import Icon. If the content of the flash drive is showing, touch the photo you want to import. If not,
select Up Folder to navigate to the flash drive, and then touch the photo. Select OK, select OK again,
and then select Cancel. The photo will be placed on the key and in the imports folder of the icon
dictionary.
• Search for an icon by category.
3. Check to see if the “text to speak” is correct. If not, select Spell Message or Define Key Function to
type text that will appear in the display. Be sure to put a space after the last character. Select OK.
4. Check to see if the key label is correct. If it isn’t, select Change Label and then select OK.
5. Select OK or Choose Next Key to Define.
Taking Your Own Photo to Use on a Key
The front and rear cameras allow you to take pictures to use as icons and visual scenes. These icons and
scenes help personalize an individual’s communication. For example, a picture of the individual’s mom
could be used as an icon on a “Mom” key. (See “Customizing a Key” above.) This would help the individual
specify his or her mom, as distinguished from moms in general.
1. Select the Tools key and then select the Toolbox key.
2. Select Camera Menu.
3. Frame the picture in the view finder. Select Take Picture.
4. Select Save as Icon.
5. Select Rename Icon, select Clear Display, type a name, and select OK.
6. Select OK again. The photo will automatically be placed in the Imports folder.
Note: When changing an icon, your photos will be in the category called Imports.
7. Select OK and then select Go to Home.