Accu-Chek Inform II Manual

8 0 8403414001 (01) 2017-11 EN-USA • Accu-Chek Inform II Addendum to Operator’s Manual
Using the Accu-Chek Inform II Base Unit Light (NEW) together with the
Accu-Chek Inform II Base Unit Hub
The Accu-Chek Inform II Base Unit Hub is able to con-
nect up to 4 Accu-Chek Inform II Base Units Light (RJ25)
and supports communication to a data management
system via Ethernet (RJ45).
For more information on how to work with the Accu-Chek
Inform II Base Unit Light in conjunction with the
Accu-Chek Inform II Base Unit Hub, refer to the complete
Accu-Chek Inform II Operator’s Manual or consult your
Roche representative. In the USA, contact Accu-Chek
Customer Care.
The Accu-Chek Inform II Base Unit Wall Mount fits the
Accu-Chek Inform II Base Unit (both legacy and new
versions) and the Accu-Chek Inform II Base Unit Light
(both legacy and new versions).
Note for System Administrator: When setting up and
configuring the Accu-Chek Inform II Base Unit Hub,
refer to the package insert accompanying the hub as
well as the “Technical Note” stored on the hub itself
as a PDF file. You can access this PDF file by connect-
ing the hub to a PC with the USB cable. For further
assistance contact your Roche representative. In the
USA, contact Accu-Chek Customer Care.

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing