Why Accucold Dispenser displays temperature sensor error?
The Accucold Dispenser displays a temperature sensor error when the temperature sensor is either open or shorted. To fix this, check the sensor and its attachments for any abnormalities.
What to do if Accucold Dispenser has evaporator temperature error?
An evaporator temperature error in your Accucold Dispenser can occur either when the evaporator temperature is 0 °C or more after 30 minutes during ice making, or when the evaporator temperature is over -5 °C after 30 minutes. In either case, check for refrigerant leakage and inspect the sensor and its attachments for any abnormalities.
How to fix water level sensor defect in Accucold Dispenser?
A water level sensor defect in the Accucold Dispenser occurs if the upper and lower limits are not detected by the water level sensor for 60 seconds at the start of ice making. The solution is replacement of the water level sensor.
Explains Safety Alert Symbol, DANGER, WARNING, and CAUTION terms.
Lists essential precautions for operating the ice maker safely.
Covers electrical, ventilation, temperature, and location requirements for safe installation.
Details safety measures during operation, cleaning, and potential hazards.
Details electrical, refrigerant, pressure, and component specs for different models.
Specifies voltage, amperage, grounding, and outlet requirements.
Lists causes and actions for Er01, Er03, Er06, Er07 errors.
Lists causes and actions for Er13, Er14, Er15 errors.
Lists causes and actions for Er16, Er20, Er25 errors.
Provides a checklist of common problems and their troubleshooting steps.
To Next Page
General
