8
ACCUFAST P4
Ink Jet Printer
Feeder mounting
Slots (4)
Feeder power
connection
Feeder power
cable
Feeder Mounting Hooks (4)
Paper Guide
Extensions
Tag Feeder
To mount the Small Envelope and Tag Feeder:
1. Open the Printer Top Cover
2. Lift the Tag feeder up so that the Paper Guide Extensions are over
the printer transport tray.
3. Set the bottom hooks in their slots and rock the feeder toward the
printer, lining up the top hooks.
4. Lower the Feeder onto its hooks, pressing it down as far as it will
go.
To Next Page
Loading...