System Board 1-23
Table 1-4 System Error Messages (continued)
Message Action
Memory Size Mismatch
CPU Clock Mismatch
Check the memory size based on
the system specifications. Check
the internal cable connections. If
you are sure that connections
and values are correct, ignore the
message. If the message
reappears, ask for technical
assistance.
Onboard Serial Port 1 Conflict Run Setup and disable the port.
Onboard Serial Port 2 Conflict Run Setup and disable the port.
Onboard Parallel Port Conflict Run Setup and disable the port.
Pointing Device Error Check and connect pointing
device.
Pointing Device Interface
Error
Replace the pointing device or
contact your dealer.
Press F1 key to continue or
Ctrl-Alt-Esc for Setup
Press
or
+ + to enter
Setup.
Real Time Clock Error Check the RTC chip. If it is still
good, run Setup. If not, replace
the RTC chip.
To Next Page
Loading...
