1.[FETCH TRAVEL CARD, TEAR OFF 1*PCS
S/N FROM TRAVEL CARD AND PASTE IT
ON THE PANEL BACK,THEN SCAN S/N
AND PANEL CODE]
2.[GET LEFT BKT AND LOCK 2*PCS
SCREW(M3*5-I) TO FASTEN IT AND
PANEL]
1.[GET BEZEL AND CHECK ITS
APPEARANCE]
2.[ASSEMBLE BEZEL ON PANEL﹐THEN
PASTE TYPE TO FASTEN PROTECTIVE
FILM ON THE BEZEL]
3.[TURN LCD]
1.[SCAN S/N AND POWER CODE]
2.[FASTEN BKT AND BEZEL IN THE RIGHT
SIDE WITH SCREW (M3*3-I)3*PCS ]
To Next Page
Loading...
