1.[PUT THE SPEAKER AT THE APPOINTED
PLACE]
2.[INSERT NETHER CCFT CABLE IN
INVERTER CABLE]
1.[FASTEN 2*PCS IO-NUT IN THE VGA JOINT]
2.[FASTEN 2*PCS IO-NUT IN THE MB JOINT]
1.[LOCK SCREW (F2.5*8.0-P)*4pcs TO FASTEN
SPEAKER]
2.[LOCK 4*PCS SCREW(M3*6-T) TO FASTEN
SPEAKER]
1.[STICK AL FOIL AT THE APPOINTED PLACE
TO FASTEN THE CABLE]
2.[STICK 1*PCS AL FOIL AT THE APPOINTED
PLACE]
To Next Page
Loading...
