System Utilities 2-63
Using the Crisis Utility Disk
1. Turn off the target machine and ensure that the AC adapter is plugged in.
Figure 2-108. Ensure the AC Adapter is Plugged In
2. Plug in the USB flash disk.
Figure 2-109. Plug the USB Flash Disk
3. Press and hold <Fn> and <Esc>, and continue with step 4.
Figure 2-110. Hold Down <Fn> + <Esc>
4. As the <Fn> and <Esc> keys are pressed, press the Power button to turn on the machine.
Wait for 3 ~ 5 seconds to make sure the system fan is in full speed, and then release the <Fn>
and <Esc> keys.
5. Wait 3~5 minutes for the system to complete the Crisis operation. Once complete, the system
will automatically power off.
To Next Page
Loading...
