5-100 Service and Maintenance
Mainboard Installation
1. Install the mainboard by aligning and inserting its I/O connectors into their slots on the upper
case.
Figure 5-150. Installing the Mainboard
2. Attach the two (2) screws M 2.5 x 3.0 (marked with red-white circle) and the screw M 2.0 x 4.0
(marked with blue-white circle) to secure the mainboard to the upper case.
NOTE: Screw torque force:
M 2.5 x 3.0 = 2.0~2.5kgf.cm
M 2.0 x 4.0 = 1.5~2.0kgf.cm
Figure 5-151. Securing the Screws
To Next Page
Loading...
