2-58 System Utilities
LAN EEPROM Utility SOP
LAN EEPROM Utility SOP (x64)
1. Extract “LAN EEPROM Utility” folder onto your desktop.
2. Find and execute “DisableUAC.reg”. Click Yes and OK. Then restart your computer.
Figure 2-99. Execute DisableUAC.reg
3. After restart, plug the AC power adaptor, and then find and execute “WINPG64.BAT”. It will
automatically update your MAC address. Then press any key to check if the MAC address has
already been updated.
Figure 2-100. Execute WINPG64.BAT
To Next Page
Loading...
