Acer AN515-51 - Mainboard Removal

5-98 Service and Maintenance
Mainboard Removal
Prerequisite:
Battery Removal on page 5-47
SSD Module Removal on page 5-52
WLAN Module Removal on page 5-55
Thermal Module Removal on page 5-71
1. Release the latch (if necessary) and disconnect the following cables from the mainboard
connectors:
• HDD cable (A)
• USB board FFC (B)
• DC-IN cable (C)
• Backlight FPC (D)
• Keyboard FPC (E)
• Touchpad FFC (F)
• Hall sensor cable (G)
• RTC battery cable (H)
• eDP cable (I)
Figure 5-147. Disconnecting the Cables
C
A
F
D
B
E
G
H
I