2-6 System Utilities
Touchpad [Advanced] / [Basic]
• When end user selects "Advance", it follows auto
select mechanism based on OS type to decide I2C or
PS2.
• When end user selects "Basic", if OS type is Win8.1
and above, I2C controller will be enable but no I2C
PTP definition. If OS type is not win8.1 and above,
both I2C controller and I2C PTP device will not be
enabled. PS2 device must be defined.
Wake on USB
while lid closed
[Enabled] / [Disabled]
• If enabled, USB devices can wake the system, even if
the lid is closed.
• The default value is [Disabled].
Lid Open
Resume
[Enabled] / [Disabled]
• System will resume from S3 state by Lid open.
• The option is only visible and working on non-
connected standby supported system
• Default value depends on project definition.
D2D Recovery [Enabled] / [Disabled]
• This function enables/disables Acer disc-to-disc
Recovery.
• To do Acer disc-to-disc system recovery via Alt+F10
key during POS.
GPT Partition
Recovery
[None] / [Save] /
[Restore]
• None: Do nothing.
• Save: Choose to save current GPT partition.
• Restore: Restore the GPT partition previously saved
• When end user choose to save/restore GPT. partition,
pop up the confirm message again, than take action
immediately.
• The option auto hidden if it's not GPT partition.
Clear GPT
Partion
[None] / [Clear]
• None: Do nothing
• Clear: Gray out when no saved data. Select to clear
saved record.
GPT Partition
Record
[No Record] / [Saved,
Date/Time]
• Record of the saved GPT partition data. Show the
date and time for the saved record.
• The option auto hidden if it's not GPT partition.
Item Name Example Remark
To Next Page
Loading...
