2-10 System Utilities
NOTE:
When prompted to enter the password, three attempts are allowed before system halts.
Resetting the BIOS password may require the computer to be returned to the dealer.
Set HDD
Password
[Enter]
• This field always show default value [Enter].
• HDD Password Security: This feature is available to
user when HDD password is set. Password can be
written on HDD only when HDD password is set.
• If system has more than 1 HDD, the items that listed
on the Security Menu should be as below:
• Set HDD0 Password
• Set HDD1 Password
Password on
Boot
[Enabled] / [Disabled]
• Defines whether a password is required or not while
the events defined in this group happened.
• Password on Boot option requires the Supervisor
Password. During login, this should be grayed out if
the User Password was used to enter BIOS Setup
Utility.
• Allows user to specify whether or not a password is
required to boot.
• The default value is [Disabled]
Item Name Example Remark
To Next Page
Loading...
