Acer AN515-51 - Page 71

System Utilities 2-33
2. Power on the target machine. Press F2 during boot to enter the BIOS Setup Menu. In the Boot
menu, set Boot Mode to “UEFI” and set “USB HDD:” to priority 1 boot device. Then, on the
Exit menu, choose “YES” on Exit Saving Changes. The system will save changes and
reboot.
Figure 2-39. Change Boot Priority Order
3. The system reboots to Shell environment with the USB disk. Search for "Removable
HardDisk" location in device mapping table. For this example, the disk path is set to "fs1:" and
the folder path is set to "cd shell".
Figure 2-40. Change Folder Path
InsydeH20 Setup Utility Rev. 5.0
Information Main Security Boot Exit
Boot Mode: [UEFI]
Secure Boot: [Enabled]
Boot priority order:
1. USB HDD :Sony Storage Media
2. Windows Boot Manager (HFS256G39TND-N210A)
Item Specific Help
Use < ↑ > or < ↓ > to select a device, then
press <F5> to move it down the list, or
<F6> to move it up the list. Press <Esc>
to escape the menu
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc
Exit
←→
Select Menu
Enter Select
►Sub-Menu F10 Save and Exit
EFI Shell version 2.40[21793.40]
Current running mode 1.1.2
Device mapping table
fs0 :HardDisk - Alias hd27a0a1 blk0
PciRoot(0x0)/Pci(0x13,0x0)/Sata(0x0,0x0,0x0)/HD(1,GPT,96CBFE01-4E78-
fs1 :Removable HardDisk - Alias hd28e0b0b blk1
PciRoot(0x0)/Pci(0x14,0x0)/USB(0x4,0x0))/USB(0x1,0x0)/HD(1,MBR,0x009
Shell> fs1:
fs1:\>cd shell
fs1:\Shell>