2-38 System Utilities
To update the DMI Pool, perform the following:
1. In Windows OS, copy āDMITOOLS.EXEā to the root directory of a DOS-bootable USB Disk.
Figure 2-48. Copy File
NOTE:
Above path is an example only.
2. On the target device, after booting to DOS using the USB disk, execute DMITOOLS.EXE to
display the usage options help.
The following examples show the commands and the corresponding output information:
1. Read DMI Information from Memory:
[Instruction & Output] Read Manufacture Name
Figure 2-49. Read Manufacture Name
[Instruction & Output] Read Product Name
Figure 2-50. Read Product Name
[Instruction & Output] Read Serial Number
Figure 2-51. Read Serial Number
C:\>DMITOOLS /Rm
Manufacturer : Acer
C:\>DMITOOLS /Rp
Product Name : xxxx xx-xxx
C:\>DMITOOLS /Rfgsn
Serial Number : 01234567890123456789
To Next Page
Loading...
