System Utilities 2-43
To update the DMI Pool, perform the following:
1. In Windows OS, copy āDMITOOLSx64.exeā to the Tools directory of a WinPE3.0/4.0 System
Disk.
Figure 2-66. Copy File
NOTE:
Above path is an example only.
2. On the target device, boot to WinPE3.0/4.0 Server and execute DMITOOLSx64.exe to display
the usage options help.
The following examples show the commands and the corresponding output information:
1. Read DMI Information from Memory:
[Instruction & Output] Read Manufacture Name
Figure 2-67. Read Manufacture Name
Copy
COMPAL ELECTRONICS, INC.
DMITOOLSx64
DMITOOLSx64.exe
C:\>DMITOOLSx64 /Rm
================================================================
COMPAL ELECTRONICS INC. V3. 0. 0. 7
Author : STD SID TEAM.
WARNING: THIS PROGRAM IS FOR INTERNAL USE ONLY.
Copyright c 2012 COMPAL ELECTRONICS INC. All rights reserved.
================================================================
Manufacturer : Acer
To Next Page
Loading...
