5-39 Service and Maintenance
Mainboard Removal
Prerequisite
Upper Case Removal on page 5-31
1. Disconnect the LVDS cable connector (A), DC-In cable connector (B), speaker cable connector
(C), IO board cable connector (D), and the LED board cable connector from the mainboard
connectors.
Figure 5:50. Disconnecting the Cables
TIP: Lift the LVDS cable from the mainboard to detach the adhesives underneath the cable.
2. Remove the screw securing the mainboad to the lower case.
Figure 5:51. Removing the Mainboard Screw
To Next Page
Loading...
