2-15 System Utilities
The system restarts automatically when finished.
IMPORTANT:
• Ensure the AC power adaptor is connected to the power source.
• If the Warning message below is shown, check if the AC power adaptor is properly
connected or not.
Figure 2:17. Warning Message
• Do not disconnect the AC power adapter.
C:\>cd Q1VZC102\DOS
C:\Q1VZC102\DOS>BIOS.bat
Warning: No AC Connected
This process requires AC power to avoid an accidental power-off
during an update.
C:\Q1VZC102\DOS>
To Next Page
Loading...
