105
• NIC2 Mac Address
• IPMI Firmware Revision
IP Address Source: Select how an IP address is assigned to a client
computer or network device. Select DHCP (Dynamic Host Configuration
Protocol) to allow a client (computer or device) to obtain an IP address
from a DHCP server that manages a pool of IP addresses and network
information on a request and grant basis. Select Static (Static
Allocation) to allow the host server to allocate an IP address based on a
table containing MAC Address/IP Address pairs that are manually
entered (such as by a network administrator). Only clients with a MAC
address listed in the MAC/ IP Address Table will be assigned an IP
address.
IP Address: The BIOS will automatically display the IP address of the
machine. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by
dots should not exceed 255.
Note: This feature can be changed by the user when the IP Source
is set to Static.
Subnet Mask: This item displays the current subnet mask setting for
your IPMI connection. This should be in decimal and in dotted quad
form (e.g., 192.168.10.253). The value of each three-digit number
separated by dots should not exceed 255.
Acer Address: The BIOS will automatically display the Acer address of
this machine. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by
dots should not exceed 255.
Mac Address: The BIOS will automatically enter the Mac address of this
machine. Mac addresses are 6 two-digit hexadecimal numbers (Based
16, 0 to 9, A, B, C, D, E, F) separated by dots. (e.g., 00.30.48.D0.D4.60).
To Next Page
Loading...
