92 Chapter 3
Removing the LCD Brackets and FPC Cable
1. See “Removing the LCD Panel” on page 90.
2. Turn the LCD Panel over on a clean surface, and lift the cable as shown to detach the adhesive.
3. Grip the adhesive strip covering the LCD cable connector and pull it back (1).
4. Remove the cable from the panel as shown (2).
5.
Remove the six securing screws (three on each side) from the LCD Panel brackets in numeric order, from 3 to 1.
6. Remove the LCD brackets by pulling them away from the LCD Panel.
Step Size Quantity Screw Type
LCD Brackets M2*3 6
1
2
2
1
3
2
3
1
To Next Page
Loading...
