System Utilities 2-15
3. Insert the USB HDD and reboot computer.
Figure 2-13. DOS Flash
4. Flash is complete when the message, Flash Programming Complete is shown.
System will restart automatically when finished.
If AC power is not connected, the following message is shown (Figure 2-14).
Plug in the AC power to continue.
Figure 2-14. AC Power Warning
ease restart the system.
C:\P5LM0100\flash
Please do not remove the AC power!
Insyde Flash Utility for InsydeH20
Version 1.3v
Initializing
File loading 100 %
Current BIOS Model name : NELA0
New BIOS Model name : NELA0
Current BIOS version: V0.12
New BIOS version: V0.12
Updating Block at FFFE8000
Warning: No AC power connect
To Next Page
Loading...
