System Utilities 2-19
Removing BIOS Passwords 0
To clear User or Supervisor passwords, open the DIMM door and use a metal instrument to
short the RTCRST# point.
Figure 2-21. CMOS Jumper
Cleaning BIOS Passwords 0
To clean the User or Supervisor passwords, perform the following steps:
1. From a DOS prompt, execute clnpwd.exe
2. Press 1 or 2 to clean the desired password shown on the screen.
Figure 2-22. Clear BIOS Password
The on screen message indicates the function success.
To Next Page
Loading...
