2-22 System Utilities
Figure 2-24. MAC.BAT
3. Reboot computer when process has completed.
Perform the following to write MAC (Media Access Control) information to EEPROM:
1. Start computer and press F2 during boot sequence to enter Setup Menu.
2. Select Boot menu to modify boot priority order.
3. Insert USB HDD and reboot computer.
4. Execute MAC.bat <xxxxxx>, where “xxxxxx” is a 6 character MAC address, to write the
MAC information to EEPROM.
C:\MAC>mac.bat
C:\MAC>eeprom w MAC.cfg
Progress --> \
Write Data to EEPROM OK!!
To Next Page
Loading...
