46 Chapter 3
Removing the WLAN Module
IMPORTANT: The following disassembly images represent the optional 3G model. The 3G module on the left of
the images may not be present.
1. See “Removing the Lower Covers” on page 44.
2. Disconnect the antenna cables from the WLAN Module.
IMPORTANT: The black cable attaches to the Main terminal and the white (or gray for models without the optional
3G module) cable attaches to the AUX terminal.
3. Move the antennas away and remove the single screw on the WLAN Module.
Step Size Quantity Screw Type
WLAN Module M2*3 1
To Next Page
Loading...
