Chapter 3 75
Removing the Mainboard
1. See “Removing the LCD Module” on page 63.
2. See “Removing the Speaker Module” on page 69.
3. See “Removing the Bluetooth Module” on page 71.
4. See “Removing the Solid State Disk Drive Module” on page 73 or “Removing the Hard Disk Drive Module” on
page 87, depending on the model purchased.
5. Remove the four (or three for the HDD SKU) screws securing the Mainboard to the Lower Cover.
NOTE: The HDD SKU Mainboard is secured with three screws.
6. Lift the Mainboard using both hands and remove it from the Lower Cover.
Step Size Quantity Screw Type
Mainboard
(red callout—SSD
and HDD SKU)
M2*3 3
Mainboard
(green callout—
SSD SKU only)
M2*3 1
To Next Page
Loading...
