101
English
of the case. This back plate will go where the tabs used to be.
8 Press the release latch to secure the card in place.
9
Locate the second PCI Express power cord from the SLI-Ready power supply and plug
it in to the second graphic card
.
10 Attach the SLI connector to connect the two graphic cards.
The system comes with an SLI connector designed to work with that
mainboard.
Note: When you power up the PC, you'll want to ensure that the video
connector (to your monitor) is plugged into the same card it was before °V
the "top" card, or original card that was installed prior to adding this
second card.
To Next Page
Loading...
