5 Advanced hardware setup64
English
• RAID 5 : Defines techniques for parity data. Data is striped and parity is
distributed across three or more drives, improving disk performance and
fault tolerance.
• RAID 0+1 : Combines RAID 0 and RAID 1 in a single system with disk
striping for optimized performance and disk mirroring for fault tolerance.
Enabling RAID
The RAID feature must be enabled in the BIOS before you can configure RAID.
To enable RAID:
1 Reboot your computer.
2 Press the Delete key to enter the BIOS setup.
RAID 0 RAID 1
To Next Page
Loading...
