5 Advanced hardware setup60
English
Setting up an SLI configuration
To enable the SLI technology:
1 When you reboot the computer after installing the SLI components, you
will be greeted with a "pop up" bubble in the lower right hand corner,
telling you that you have an SLI-enabled PC.
2 Click on the SLI capable system message to open the following window.
1
1
2 Select the Enable SLI technology checkbox, then click Apply.
Note: Currently, SLI technology does supports one display when enabled. If
you have multiple displays and wish to use more than 1 display, you will
need to disable SLI technology in the same desktop properties menu. You
can enable SLI technology at any time, but note that you will only be able
to power 1 display when enabled.
You can also access the Set SLI Configuration page by opening the NVIDIA
Control Panel. Perform steps 1 through 3 of the "Enabling SLI Antialiasing" on
page 58.
To Next Page
Loading...
