Machine Maintenance 3-31
Removing the Thermal Module 0
1. Perform the “Removing the Mainboard” procedure described on the preceding on
page 3-28.
2. Disconnect the thermal module fan cable from the mainboard.
Figure 3-37. Fan Cable
3. Loosen the spring-loaded captive screws securing the thermal module. Follow the screw
sequence indicated on Figure 3-38.
Figure 3-38. Thermal Module Screws
Table 3-38. Screws
Step Screw Quantity Screw Type
Thermal Module Disassembly – 5 –
To Next Page
Loading...
