3-72 Machine Maintenance
External Module Reassembly Process 0
Reinstalling the Keyboard 0
1. Turn the computer over and open the LCD panel.
2. Connect the cable to the mainboard (1), then press the connector latch (2) until it locks
into place. Place the keyboard into its socket (3).
Figure 3-105. Keyboard
3. Use a non-marring plastic flat-blade screwdriver to push the latches on the top side of the
keyboard, then press the keyboard until it latch into place.
Figure 3-106. Keyboard Latches
4. Turn the computer over to acces the base side of the lower case assembly.
To Next Page
Loading...
