Machine Maintenance 3-15
Removing the Keyboard 0
The keyboard is easily warped or damaged during the removal process. Take
care not to use excessive force when removing.
1. Perform the “Removing the Battery Pack” procedure described on page 3-9.
2. Perform the “Removing the ODD Module” procedure described on page 3-12.
3. Remove the screw securing the keyboard to the lower case.
Figure 3-12. Upper Case Screw – Base Side
4. Turn the computer over and open the LCD panel.
Table 3-12. Screw
Step Screw Quantity Screw Type
Keyboard Disassembly M2.5 × L5 1
To Next Page
Loading...
