Acer Aspire V5-573 - Using the LAN MAC EEPROM Utility

System Utilities 2-43
Using the LAN MAC EEPROM Utility 0
1. Prepare a bootable USB Flash Disk.
1. Copy
DQDMI.exe to the bootable USB Flash Disk.
2. Insert the USB Flash Disk and power on the system.
3. Press
F2 during boot and change the BIOS Main menu item F12 Boot Menu to
Enabled.
Figure 2-75. F12 Boot Menu enable
4. Change the BIOS Boot menu item Boot Menu to Legacy.
Figure 2-76. Legacy BIOS option
5. Press
F10 to Save and exit.
6. Press
F12 during the POST (power-on self-test) screen to enter the Boot Option
Menu. Select USB HDD and boot to DOS.