2-6 System Utilities
Main 0
The Main tab allows the user to set system time and date, enable or disable boot option
and enable or disable recovery.
Figure 2-2. BIOS Main
Table 2-2 describes the parameters shown in Figure 2-2.
Table 2-2. BIOS Main
Parameter Description Format/Option
System Time BIOS system time in 24-hour format Format: HH:MM:SS
(hour:minute:second)
System Date BIOS system date Format MM/DD/YYYY
(month/day/year)
Total Memory Total memory available N/A
Network Boot Option to boot system from LAN (local
area network)
Option: Enabled or Disabled
F12 Boot Menu Option to use boot menu during POST Option: Enabled or Disabled
D2D Recovery Option to use D2D Recovery feature Option: Enabled or Disabled
Wake on LAN Option to use Wake-on-LAN feature Option: Enabled or Disabled
SATA Mode Option to set SATA controller mode Option: AHCI or IDE
System Time [11:14:48]
System Date
Total Memory
F12 Boot Menu
SATA Mode
[03/21/2013]
8192 MB
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[AHCI Mode]
Item Specific Help
This is the help for the hour
field. Valid range is from 0 to
23. REDUCE/INCREASE:
F5/F6.
3.7
D2D Recovery
Wake on LAN
Network Boot
To Next Page
Loading...
