3-86 Machine Maintenance Procedures
Replacing the WLAN (Wireless Local Area Network) Module 0
1. Place the WLAN module into mainboard connector (D) (Figure 3-104).
Figure 3-104. Replacing the WLAN Module
2. Install and secure one (1) screw (A) to the WLAN module (Figure 3-105).
Figure 3-105. WLAN Module
3. Connect the main (B) and auxiliary (C) antennas to the WLAN card (Figure 3-105).
ID Size Torque Quantity Screw Type
A M2.5*3I 2.0±0.2KGF/CM 1
To Next Page
Loading...
