Acer Aspire V5-573 - Travel Considerations

System Utilities 2-9
2. Type a new password in the Enter New Password field. Passwords are not case
sensitive and the length must not exceed 12 alphanumeric characters (A-Z, a-z, 0-9).
Retype the password in the Confirm New Password field.
IMPORTANT:
+
Use care when typing a password. Characters do not appear on the
screen.
3. Press
Enter . After setting the password, the computer sets the User Password
parameter to Set.
NOTE:
NOTE:
Password on Boot must be set to Enabled to activate password feature.
4. Press
F10 to save changes and exit BIOS Setup Utility .
Removing a Password 0
Perform the following:
1. Use the ↑ and ↓ keys to highlight Set Supervisor Password and press
Enter . The
Set Supervisor Password dialog box appears:
Figure 2-5. Set Supervisor Password
2. Type current password in Enter Current Password field and press
Enter .
3. Press
Enter twice without typing anything in Enter New Password and Confirm
New Password fields. Computer will set Supervisor Password parameter to
Clear.
4. Press
F10 to save changes and exit the BIOS Setup Utility .
Changing a Password 0
1. Use the ↑ and ↓ keys to highlight Set Supervisor Password and press Enter . The
Set Supervisor Password dialog box appears.
Figure 2-6. Set Supervisor Password
2. Type current password in Enter Current Password field and press
Enter .
3. Type new password in Enter New Password field. Retype new password in
Confirm New Password field.
4. Press
Enter . Computer sets Supervisor Password parameter to Set.