Aspire XC600 Service Guide 9
Navigating through the Setup Utility
Use the keys listed in the legend bar on the bottom of the Setup screen to work your way through the various
menu and submenu screens of the Setup Utility. The table below lists these legend keys and their respective
functions.
Key Function
Left/Right arrow
keys
Move the cursor to the menu screen you want. The currently selected screen will be
highlighted and the items it contain will be shown.
Up/Down arrow
keys
Move the cursor to the item you want. The currently selected field will be highlighted.
Enter • To open the page for the currently selected menu/submenu
• To apply a field value.
+ / - / space bar To select a value for the currently selected field (only if it is user-configurable). Press
these keys repeatedly to display all possible entries. A parameter that is enclosed in
square brackets [ ] is user-configurable. Black font parameters are not user-
configurable for one of the following reasons:
• The field value is auto-configured or auto-detected.·
• The field value is informational only.
• The field is password-protected.
F1 To bring up the General Help
window. The General Help window describes other Setup
navigation keys that are not displayed on the legend bar.
F7 Restore the saved User Default settings.
F8 Save the current menu settings as User Default settings.
F9 Press to load default system values.
F10 Press to save changes and close the Setup Utility.
Esc If you press this key:
• On one of the primary menu screens, the Exit
menu displays.
• On a submenu screen, the previous screen displays.
• When you are making selections from a pop-up menu, closes the pop-up without
making a selection.
To Next Page
Loading...
